CSH01.1C-SE-ENS-EN1-MD1-S2-S-NN-FW

Product Description

CSH01.1C-SE-ENS-EN1-MD1-S2-S-NN-FW is a digital control section. It forms part of an IndraDrive controller. Typical controller applications include food machines, printing machines and machine tools. The controller has four main components: a power section, a control section, a control panel and firmware. The control section contains processing circuits, memory and slots for hardware modules. The power section accepts input voltage and converts it into acceptable voltage for the control section components. The control panel allows controller configuration. The firmware installs on the control section and enables software features. Firmware for the CSH01.1C-SE-ENS-EN1-MD1-S2-S-NN-FW must be ordered separately. The control section plugs into the power section. Bosch supplies assembled controllers. Trained personnel should carry out controller assembly if the power section and control section are supplied separately. The CSH01.1C-SE-ENS-EN1-MD1-S2-S-NN-FW mounts vertically and cools via convection cooling.

The recommend ambient air temperature range is 0 to 40 degrees Celsius. The CSH01.1C-SE-ENS-EN1-MD1-S2-S-NN-FW is a configurable device that belongs to the category of advanced control sections. It comes with several factory-installed hardware modules including a digital I/O extension module, an encoder HSF/RSF module and an encoder IndraDyb/Hiperface module. A safety module is also installed on the unit and supports safe motion. Each CSH series device supports a master communication interface. Options for master communication include Profibus, SERCOS, SERCOS II, Multi-Ethernet and CANopen. The CSH01.1C-SE-ENS-EN1-MD1-S2-S-NN-FW is equipped with SERCOS master communication. Dimensions of the control section are 241 x 49.5 x 103 millimeters. Power consumption of the unit is 7.5 Watts and the inrush current value is 4 Amps. The maximum pulse width is 100 milliseconds. Each of the installed modules draws additional power from the power section. Trained personnel should operate and maintain the device.