CSH01.1C-NN-ENS-NNN-MEM-L1-S-NN-FW

Product Description

The CSH01.1C-NN-ENS-NNN-MEM-L1-S-NN-FW control section depicts a starting lockout mechanism that is in compliance with stop category 0 as per EN 60204-1 specifications. This Bosch Rexroth advanced section supports a mounting as well as dismounting for a maximum of 20 times. The control panel of this product is not recommended for hot plugs. The operating states, error and command diagnoses as well as pending warnings of the device are highlighted in the display of this control panel. The unit supports a multimedia to read and store multiple data such as operating data, drive parameters and firmware. It has one normally open relay contact.

This product depicts digital outputs that must not be operated at low resistance sources. The device has a control delay of at least 20μs for its Type 1 digital inputs. Its RS 232 serial interface can be put to use for parameterization, programming and diagnosis at the time of servicing and commissioning. The unit comes with a power consumption of 7.5W at 24VDC. This control section has a MEM optional module at its X10 connecting point to emulate incremental encoder and absolute value signals for evaluation by means of a control unit. The CSH01.1C-NN-ENS-NNN-MEM-L1-S-NN-FW section is backed up by a warranty period of one year.

The control section portrays two analog outputs. The product depicts two current control, position control and velocity control cycle times. The starting lockout of the device does not support bus wiring. The differential inputs of its ENS optional module have an input frequency of 400kHz for 5V-TTL square wave signals. The digital outputs of this unit are capable of supplying current actively but not sinking it. Their energy absorption capacity helps to limit the voltage peaks that are produced when the inductive loads are turned OFF. This advanced section can be shipped through reputed freight carriers with a worldwide presence.