Product Description
The CSB02.5B-ET-EC-EC-NN-NN-NN-NW control section from Bosch Rexroth is used in a drive controller from the same manufacturer. This control section has to be fitted inside a power section. This product is not designed to be in contact with tools and similar exposed conductive parts. This device belongs to the CSB product group of such offerings. The unit is designed for installation in industrial machinery. Its X4 connector is a 15-pin D-Sub female connector that is used for EC encoder evaluation. The section has an extended scope. This product houses a type plate fitted on it apart from the ones for the drive controller and the power section.
This control section supports the MPx-19VRS firmware or higher. The product has a series code of 02. The device should be used only as intended to avoid property damage or personnel injury. The unit tends to have a hot housing surface during operation. It is not fitted with any control panel. The section must be operated, mounted and dismounted only by people authorized to do so. The product supports a limited number of plug-in actions. The drive controller used with the device has to be programmed before it is commissioned for the motor to perform the application-specific functions.
The basic control section features a single axis. This product is ideal for use with the HMU05 universal inverter. The device has a maximum pulse width of 1ms. The isolated inputs/outputs of the unit do not utilize the 24V power supply of the power section. They have to be connected with a separate power supply. The section portrays a Multi-Ethernet module for master communication. The product encompasses 11 digital inputs of which two can be configured as a probe. The device does not incorporate any safety technology. This CSB02.5B-ET-EC-EC-NN-NN-NN-NW section with its one-year warranty backup and can be shipped all over the world.
Wake Industrial Warranty
