Product Description
The CMP60.1-SP-304-FN-K001-FW CNC control module from Bosch Rexroth is used along with the manufacturer’s MTX control system. It must be ensured that the interface of this control system is used only by people with expertise in using PCs and operating systems. The CMP series module is the core component of the motion control system. The product encompasses both CNC and PLC functions. The device helps to activate inputs and outputs through a PROFIBUS-DP interface. This unit has a series code of 60 and a design code of 1. The MTX control system is available for deployment with both complex high-throughput systems as well as single machines to assist in automatic production.
The control module is fitted inside an unassigned PCI slot present in industrial PCs from the manufacturer or third-party PCs. The product comes equipped with a typical power consumption of 21W. The device features a universal PCI bus interface that is compatible with 3.3V and 5V voltage supplies. Its data is buffered using a battery connected externally. The unit is integrated with a highly sensitive fan that should not be touched to avoid it getting damaged. The module has to be replaced if it is found to be defective and cannot be repaired. The CMP60.1-SP-304-FN-K001-FW control module can be shipped to your address with a one-year warranty.
The MTX control system can be set up with or without the control module. The menu associated with the module helps to identify the version of the firmware installed. The device can be used to perform the firmware download after which a reset must be performed. The unit starts up after a reset and halts at a red zero. It is allotted a fixed IP address at the time of configuration for its communication with the PC. This CNC module can be sent through any of the reputed freight carriers safely.
Wake Industrial Warranty
