✓ In-Stock!

Wake Industrial LLC is not an authorized distributor of this product.

CML75.1-NP-900-NA-NNNN-NW

  • Rated 4.5 (11 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911173002
    Available

Current response time:

5 Minutes 40 Seconds

CML Control Drive is manufactured by Bosch Rexroth Indramat. This drive has 8 input terminals and 8 output terminals. The voltage of this drive is 24V dc and the network type is Ethernet. This drive's memory is min 256 MB.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

Bosch Rexroth provides worldwide services in the manufacturing and maintenance of servo motors, controllers, and frequency converters for different automated processes in industries. The company is highly concerned about its Customer satisfaction.

The CML75.1-NP-900-NA-NNNN-NW model can only be installed horizontally in a control cabinet and during installation maintain a safe distance from the noise source. The L75.1 controller dissipates its heat to the surrounding air therefore, a safe distance of 100 mm (at top and bottom), and 30 mm (at the sides and front) should be maintained during installation. The model operates at the DC supply voltage of 24V with -15% to +20% of tolerance (without residual ripple). The current consumption of the model is 8 A, and 20 W of power is consumed by the controller while operating between the temperature range of +5 to +55 degree Celsius at the maximum height of 2700 meters above sea level and the further increase in temperature/altitude will result in decreasing the efficiency of the controller. The L75.1 controller uses a 3V lithium battery to protect data in the SRAM memory and the average life of the battery is at least 5 years.

The model CML75.1-NP-900-NA-NNNN-NW comes with a PROFIBUS interface for effective communication between control, drive, motor, and other input/output devices. The model comes with 4 GB built-in DRAM memory which is used by the software and applications. The firmware for this model must be ordered separately. The controller doesn’t provide any resistance against water due to its IP20 protection standard therefore, it should be installed in the control cabinet and the functional grounding is done via a grounding screw which is positioned below the control. The model comes with an optional serial interface and an Ethernet interface. The model can operate ideally between the relative humidity of 5% to 95% and it also provides resistance to the 15 g shocks according to the EN 60068-2-27. This control unit can be shipped globally with a one-year warranty period from Wake Industrial.

  • cml75.1-NP-900-NA-NNNN-NW
  • CML75.1NP900NANNNNNW
  • CML75.1-NP-9OO-NA-NNNN-NW

CML75.1-NP-900-NA-NNNN-NW Technical Specifications

Memory DRAM: min 256 MB
Network Type: Ethernet
Number of Inputs: 8
Number of Outputs: 8
Voltage: 24V dc
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo