CML40.2-NP-220-NA-NNNN-NW

Product Description

The CML40.2-NP-220-NA-NNNN-NW control by Bosch Rexroth must be used only in the specified configuration and combination of components. This control may trigger interference when it is operated in residential areas. The product should not be operated under water or when there is extreme temperature fluctuation. This product comprises an inline interface, an Ethernet connection interface and a serial RS 232 interface. The device is powered by a 24 VDC supply voltage with -15%/+20% tolerance and +/-5% residual ripple. This unit must be free of condensation all the time. It can be operated in machine tools and handling and assembly systems. The control should be assembled, installed, and operated as specified in its documentation. This product is likely to have a housing surface during the operation phase. The device can be equipped with a single-pin ready contact. This unit has eight digital inputs and outputs with electrical isolation. It has a power consumption of 9 W in the basic states without the connected I/Os and additional modules. The control is prone to destruction because of overheating. The product enters a Standby mode when its internal temperature reaches 75 °C. This device is CSA Certified, UL Listed, and CE Certified. The unit is equipped with four keys and a 5 x 10 dot matrix eight-digit display on the front panel to support its operation. Its reset button can be actuated only with the help of a tool. This control has a dedicated interface for a flash card to store its application programs. The product is not integrated with a blower connection. This device has an operating relative humidity varying from 5% to 95% according to DIN EN 61131-2 specifications. The unit must be operated in an environment free of acids, alkaline solutions, salts, metal vapors, and other electrically conductive contaminants. Its housing must have at least an IP 54 protection class as per DIN VDE 0470-1 specifications.