CLM01.3-X-0-4-0-FW

Product Description

The CLM01.3-X-0-4-0-FW is manufactured by Bosch Rexroth Indramat, and it is a four-axis positioning control in the series of CLM devices. The design control of this equipment is of type 3, and it is in the CLM product line 1 series. Its firmware type is factory-assigned, and it features 4-axis and can only be used with type A software. The execution of the liquid crystal display of the CLM01.3-X-0-4-0-FW is standard and devoid of backlight. It comes with a standard I/O expansion, and it has no room for extensions. The mechanical limitations of this equipment influence its performance rating.

The allowable temperature of the operating environment of the CLM01.3-X-0-4-0-FW is rated 5 to 45 degrees C (41 to 113 degrees F). When storing and transporting this positioning control device, the recommended air temperature is between a lower limit of -30 degrees C (-22 deg. C) and an upper limit of 85 degrees C (185 deg. F). The maximum mounting and operating height of the CLM01.3-X-0-4-0-FW is 1000 meters above sea level, but with an adequate cooling mechanism, higher operating altitudes are permitted. The design of this device conforms with the IP 10 protection system, and it is suitable for installation in a cabinet housing.

The I/O interface of the CLM01.3-X-0-4-0-FW has 24 standard CLM auxiliary inputs and 19 standard CLM auxiliary outputs. At 24 volts DC, the auxiliary inputs of this equipment will have a current draw of 10mA. The display panel of this CLM device features twenty (20) pressure-sensitive membrane keypads and an LCD module for the display of operational errors, faults, parameters, and other diagnostic outputs. The display module on the CLM01.3-X-0-4-0-FW can be detached and mounted away from the device (up to 2m) with the recommended connection cable.