CDB01.1C-SE-ENS-EN2-NNN-NNN-S2-S-NN-FW

Product Description

The CDB01.1C-SE-ENS-EN2-NNN-NNN-S2-S-NN-FW control section manufactured by Bosch Rexroth is plugged inside the power section of the drive controller. The basic universal section should never be operated on its own. The product supports a limited number of plug-in actions. The device comes with a line code of 01. The unit does not have any optional module at its X8.1 and X8.2 connecting points. It implements Safe Motion (SIL2 / cat. 3 PL d) safety technology. The section makes use of a SERCOS interface with separate pins for transmitting and receiving data. This interface has chances of getting damaged if the maximum tightening torque of its union nut is exceeded.

The control section encompasses screw terminal blocks and spring terminals at their connecting points. The product is free of harmful materials such as asbestos, mercury and chlorinated hydrocarbons. The device incorporates an EnDat 2.1 / 1 Vpp / TTL encoder as its optional module at the X4.2 connecting point. This encoder is connected by means of a D-Sub connector with 15 poles. The unit has live electrical connection points when the power is turned on. Its firmware must be bought separately. This CDB01.1C-SE-ENS-EN2-NNN-NNN-S2-S-NN-FW section features one-year backup support from Wake Industrial.

The product is not intended to be operated underwater. The device should not be operated near high-frequency and radio equipment. This unit must not be subject to jamming and/or crushing during handling and mounting. It is necessary to wait for at least half an hour after switching off the power so that the capacitors in the section get discharged fully. The section features two axes. The product uses a cable with stranded wire of 0.5mm² to 0.5mm² cross-section for connecting the safety optional module. The device is integrated with a standard control panel that has to be plugged in before the controller is powered on. This control section can be sent anywhere across the globe.