Product Description
The CCD01.1-KE06-01-FW box terminal is manufactured by Bosch Rexroth. This box terminal can be used to plug in option cards. This product utilizes firmware for its proper functioning. The firmware must be bought as a separate sub-item. The device has one LED for power status, two LEDs for data transmission status, and a couple of LEDs for link status. It also features two connectors with eight pins on each of them. These connectors have no connections on their fourth, fifth, seventh, and eight pins. The earth wire of the unit should be permanently connected to the electrical components to avoid electric shock.
The box terminal is capable of supporting four option cards at a time in its four slots. These slots are named U1 to U4. The configuration rating plate indicates the option card present in each slot. For cross-communication, the device makes use of a SERCOS III interface. This is in compliance with IEE 802.3 standards. The H12 and H10 LEDs highlight the status of the transmission of data and are yellow. The pins 1 and 2 on each connector act as differential outputs and are used for the transmission of 10/100 Base-T signals.
The X24 and X25 connectors support RJ 45 type connection. The inside of the cabinet in which the terminal is mounted is cooled during operation using cold technology. The pins 3 and 6 of both connectors of the product function as differential inputs. These inputs help to receive the 10/100 Base-T signals. The H11 and H13 green LEDs help in identifying the network connection availability. The 10 Base-T signals comply with IEEE 802.3i standards while the 100 Base-T signals conform to IEEE 802.3u standards. The CCD01.1-KE06-01-FW unit is backed by a one-year warranty and can be shipped globally to the address of your choice.
Wake Industrial Warranty
