Product Description

The BTM15.2-TA-TA-T-SA-VA-2EA machine operator panel from Bosch Rexroth comprises a basic rack along with five modules. This operator panel is integrated into the manufacturer's machine control panel. The product is available as a complete module that is configured according to its type code. This device is one of the many operator panels in the manufacturer's BTM product group of such offerings. The unit is associated with absolute addresses in its Interbus-S module. It is integrated into a machine control panel. The panel has three modules with 15 pushbuttons or LEDs in each module. This device encompasses a motherboard in the second slot. The unit also incorporates a motherboard in the second slot. Its InterBus-S module comprises five diagnostic LEDs on its back. This panel is provided with a supply voltage of 12 VDC to 24 VDC at its X2 connector. The product houses a remote bus and a local bus in its Interbus-S module. This device must not be used outside the specified ambient operating conditions. The unit can be shipped globally through reputed freight carriers. Its addressing system does not need a hardware address selection. This panel encompasses a spindle override module with three push buttons or LEDs. The product is lightweight and weighs approximately 2 kg. This device must be stored and transported at a temperature varying from -20 °C to 60 °C. The unit is connected to the supply voltage using an INK 243 cable. Its modular design helps in its adaptation to the machine's requirements. This operator panel has a one-year warranty period.