ADP134D-B35OL1-CS0H-D2N1

Product Description

The ADP134D-B35OL1-CS0H-D2N1 is an ADP series industrial motor from Bosch Rexroth. It is available in an IP65 rated housing that provides complete dust protection. Weight of the motor is approximately 135 kilograms. The maximum speed that the motor shaft can sustain is 7500 RPM. The rated shaft speed is 1150 RPM. The rated motor torque is 160 Nm and the torque at standstill is 160 Nm. The rated motor current is 50 Amps and the current at standstill is 50 Amps. The ADP134D-B35OL1-CS0H-D2N1 motor produces 19.3 kilowatts of nominal power output. Cables used for motor power connections should have a minimum cross-section of 10 mm². Thermal time constant of the ADP134D-B35OL1-CS0H-D2N1 motor is 55 minutes. The ADP134D-B35OL1-CS0H-D2N1 is a fan cooled motor that relies on surface cooling for heat dissipation.

The cooling fan is provided with the motor and is IP24 rated. Direction of air flow produced by the fan on the ADP134D-B35OL1-CS0H-D2N1 is sucking. The average air flow produced by the cooling fan is 850 m³/hour. The main motor shaft includes a full key and a sealing ring. The shaft seal protects motor bearings and improves operating life span and motor reliability. The main shaft is without a B-end. The ADP134D-B35OL1-CS0H-D2N1 motor is without a holding brake. Integrated digital servo feedback is available on the ADP134D-B35OL1-CS0H-D2N1. The motor is deployed in combination with Powerdrive controllers from Bosch for industrial and commercial applications. It can be flange mounted or foot mounted. The location of the power connection is on the top and output direction of power connection is on the left-side. Handling, installation, operation and maintenance of the motor and associated controllers and accessories should be performed by trained personnel. This unit can be shipped globally with a one-year warranty period from Wake Industrial.