ADF164B-B35TC0-AS06-A2N2

Product Description

The ADF164B-B35TC0-AS06-A2N2 is a liquid-cooled main spindle motor and act as a servo motor in machines and tools. These spindle motors are well proven for textile, plastics injection and textile module machines. It comes with the power range of broad speed range and broad fielding weakening range of 1:6. The nominal current of the drive is 111A, and the nominal voltage is 380A. Nominal heat dissipation of the drive is 5.4kW. The ADF164B spindle drives are designed for flange mounting. This unique spindle drive needs no maintenance as it works according to the induction principle.

The spindle drive has integrated holding brakes which make possible to clamp the output shaft into standstill position. The holding brakes vary either electrically accurate clamp or release capabilities and integrated into power terminal and it triggered by the unit control circuits. The holding torque of the brakes are 100Nm for electrical clamp and 70Nm for electrical release, and nominal connect voltage for holding brakes are 24+/-10%. For electric clamp nominal current should be 1.8A as well as for electrical release should be at 2.0A.

The ambient elevation for the ADF164B-B35TC0-AS06-A2N2 spindle motor is not restricted. It can effectively work at any elevation due to its liquid-cooled technology, it only depends on maintain proper cooling parameters. The ambient temperature is 0°C to 45°C for the spindle motor for the safe operation. It comes with the Protection category as per DIN 40050, protected by their housing and cover against; contact guard, penetration by extrinsic objects or seeping water. The power terminal in main spindle motors mainly comes in a terminal box or a power connector. Integrated into power terminals are connections for motor NTC thermistor and holding brake. This unit can be shipped globally with a one-year warranty period from Wake Industrial.