2AD280B-B03LL1-AS06-B2N1

Product Description

The 2AD280B-B03LL1-AS06-B2N1 product is a servo motor from the 2AD series of asynchronous motors. This motor uses the guidelines of IEC 34-7 standard for its installation. It can be mounted by its flange. The main power connector of this motor is positioned on the left side of the body. The output power connection direction of this motor is on the left also. This motor has a blower attached to it to dissipate the heat produced during its operation. The blower connection of this motor has a plug to put in the power supply. The blower is attached on the axial axis of the motor and it cools the motor by blowing the air on it. The blower has a single-phase power supply and uses 230 volts of AC power.

The internal windings of this motor are connected in a type of connection. This indicates the motor uses a lot of electrical power. This motor has no holding brake installed in it as per its product code, mentioned in its manual. This motor uses digital servo feedback to provide information about the speed and the rotational position of the motor. This feedback is generated by an incremental encoder which is a single turn type. This encoder has a resolution of 512 cycles per revolution of the motor.  The encoder produces an output signal in the sinusoidal shape.

This motor does not come with any kind of shaft sealing. The shaft of this motor has a key and key way in it which is used to balance it out. This motor uses a standard type of ball bearings in it for smooth rotational motion. In this case, the standard type of bearing is a deep groove ball bearing. This motor is dynamically stabilized in accordance with the DIN ISO 2373 standard and produces a vibrational severity of level R.