Product Description

The Bosch Rexroth 2AD180C-B35OA1-BS03-B2N3 asynchronous motor comes fitted with a blower for surface cooling. This motor can be mounted only after checking for visible damage to its parts. The product can cause body injury due to improper handling and mounting. This device has a nominal power rating of 52 kW. The unit installation must be done according to the instructions given in its documentation. It can be incorporated in packaging and foodstuff machines. This motor is controlled and monitored by the connected drive controller. The product is tested for insulation resistance according to EN 60204 specifications. This device must not be subject to high-voltage inspections by the customer. The unit must not be lifted by holding onto its blower. It is meant to be transported by using suitable lifting equipment on the eye-bolts on its housing. This motor is equipped with protective caps and covers that must remain intact during transport and storage. The product has to be worked on with extreme care to minimize the risk of damage and accidents. This device comes with fastening holes to support its mounting. The unit encounters radial and axial forces during the operation phase. Its bolted connections must be capable of withstanding the forces because of the motor weight and the forces when the motor is in use. This asynchronous motor should be mounted in a dry and clean environment that is free of dust. The product-related connections must be carried out using the manufacturer's readymade cables because of their extreme load capability and resistance as well as their ability to meet EMC requirements. This device has a maximum speed of 6000 min-1. The unit is to be commissioned after its electrical connection has been established.