Product Description

The 2AD134B-B350B1-FS07-B2N1 291396 asynchronous motor from Bosch Rexroth deploys a star connection. This motor offers a drive solution with a high power density and open functions when it is used with a digital drive controller. This product must be used only in its original state without any structural changes. The device is widely used in metal-forming machine tools. This unit is not meant to be operated under water at any point in time. It must be allowed to cool down before its surface is touched after the power supply is turned off. The motor uses an axial blower with in-take style airflow for its surface cooling. This product portrays a rated speed of 2000 rpm. The device has a frame size that is proportional to its shaft height. This unit is dynamically balanced in accordance with the DIN ISO 2373 requirements. It has two type plates that must be clearly visible. The motor has a noise level of 75 dB(A). This product depicts an overall length of 550 mm. The device has a high temperature on its housing if its bearings are defective or the blower fails. This unit related blower must be checked every 1000 operating hours for its functionality and air circulation. The asynchronous motor should not be worked on when its surface is hot. It has the ability to function like an induction motor. This product portrays an absolute accuracy of +/-0.5' for its feedback. The device uses a flanged socket for its feedback connection. This unit supports flange and foot mounting styles. It is capable of accepting only very low axial loads. The motor is designed to operate between 0 ?C and 45 ?C.