2AD132C-B35OA8-BS03-A2N2

Product Description

Crafted by Bosch Rexroth, the 2AD132C-B35OA8-BS03-A2N2 asynchronous AC motor must be associated with only suitable lifting equipment on its eyebolts. This motor must be checked for damage before it is put into operation. The product comes with protective caps and covers that must remain intact until assembly. This device should be protected from corrosion and dampness. The unit can be installed vertically with the output shaft facing upward or downward. Its blower has an IP 24 protection class.

This motor has reduced grease lifetime for its bearings by 50% with vertical installation. This product tends to get thermally overloaded because of dirt buildup in its blower. This device is free of any holding brake. The unit has a high degree of quiet running. Its protection class and installation position must be considered when planning the system. This motor incorporates a shaft-hub connection with zero backlash. The product has standard ball bearings that support high-speed operation. This device depicts a mechanical lifespan of 20,000 operating hours for its bearings. The unit is balanced dynamically according to DIN ISO 2373 specifications. It is not meant to be operated in explosion-endangered areas.

This motor is tested for position tolerances and concentricity of the mounting flange and output shaft end in accordance with DIN 42955 specifications. The product is prone to damage because of improper storage. This device is to be installed before doing any electrical connection on it. The unit has 11 mm mounting holes that are compatible with M10 screws on its housing. Its bolted connections must be capable of withstanding the force due to its weight. This asynchronous AC motor can be connected with only those third-party cables that meet EMC requirements.