2AD132C-B35OA3-BS03-A2N3

Product Description

The 2AD132C-B35OA3-BS03-A2N3 asynchronous AC motor engineered by Bosch Rexroth functions like an induction motor. This motor is compatible with three categories of drive controllers from the manufacturer. The product features an optimum adaptation to the machine in which it is installed. This device must not be subject to any structural changes. The unit can be used as a servo-drive or rotary main-spindle motor. Its drive controller should be programmed before startup so that the motor can perform the application-specific functions.

This motor should be operated within the specified ambient conditions. The product can take up to 140 minutes to cool down completely. This device causes dangerous drive controller movements if its parameters have been incorrectly input before operation. The unit is delivered with two nameplates. Its bearings have a lifespan of 20,000 operating hours. This motor has a continuous standstill current until its derating speed is reached. The product has two NTC-type temperature sensors in its windings. This device encounters radial and axial forces when it is in use. The unit has an IP 54 protection class for its blower. It is delivered without a holding brake to support its operation.

This motor is not equipped with any shaft seal. The product must be installed so that the blower screen is placed sufficiently far from the installation machine. This device has no second shaft end. The unit has a high resolution for its feedback. Its output shaft is located on the drive end. This asynchronous AC motor supports a radial load on the output shaft based on its shaft design, bearing type, and average speed.