2AD132C-B35OA2-BS03-B2N2

Product Description

The 2AD132C-B35OA2-BS03-B2N2 is a 96 Nm AC servo motor that can spin at a rated speed of 1500 rpm. It is also capable of spinning at the maximum speed of 7500 rpm when operating under maximum operating conditions. The normal electrical rating for this servo motor operation is 169 volts AC with a current draw of 65 amperes. The motor has a 3-phase design and requires an input voltage frequency of 50 to 60 Hz to operate normally and according to world standards. Each phase of the input power supply voltage is used to power up the poles present in this servo motor, which helps induce the magnetic field needed to rotate the motor shaft.

To keep the output of the servo motor accurate to the required value, the 2AD132C-B35OA2-BS03-B2N2 comes with a high-resolution feedback system, which ensures the motor shaft end is positioned at the right place using an incremental encoder or an absolute encoder, based on the user's preference and application requirements. To regulate the speed of the servo motor, the 2AD132C-B35OA2-BS03-B2N2 also comes with a tacho feedback system, which generates a proportional feedback signal whenever the servo motor speed increases by a speed of 1000 rpm, allowing the motor controller to calculate the current speed of the servo.

To keep the motor protected from various environmental factors when installed in an industrial setting, the 2AD series of servo motors comes with an IP 65 protection rating, which not only provides protection against dust particles but also keeps the motor safe from water particles, withstanding low levels of pressure. To keep this servo motor thermally protected against fires, which may reach up to 170 degrees Celsius, the 2AD132C-B35OA2-BS03-B2N2 comes with thermal insulation of class F.