2AD132C-B35OA1-CS13

Product Description

Offered by Bosch Rexroth, the 2AD132C-B35OA1-CS13 asynchronous motor is perfectly suitable for industrial application and processing. This motor offers a drive solution with a high power density and open functions. The product is one of several such motors in the 2AD series. This device must be used only as intended by the manufacturer. The unit is put to inappropriate use if it is operated outside the specified ambient conditions. Its surface portrays a temperature of over 60 degrees C when it is in use.

This motor tends to have a high electrical voltage because of incorrect connections. The product must be used only after reading and understanding its operating, maintenance, and safety instructions. This device must not be picked up by the blower or the output shaft. The unit causes dangerous movements of the drive controller because of faulty control. It must be lifted using appropriate tooling equipment correctly. This motor must not be disassembled in the pressurized state. The product has a frame size based on the height of its output shaft. This device must never be operated without the blower. The unit tends to get thermally overloaded because of reduced blower performance due to dirt accumulation. Its bolding brake should be used only in standstill mode.

This motor can function like a servo drive motor or a rotary main-spindle motor. The product is suitable for installation in packaging and paper-processing machines. This device should be in the de-energized state when checking the functionality of its holding brake. The unit encompasses the power and encoder connections on the same side. It has no shaft seal. This asynchronous motor supports low axial loads.