2AD132C-B35OA1-BS06-A2N1

Product Description

The 2AD132C-B35OA1-BS06-A2N1 asynchronous AC motor produced by Bosch Rexroth poses a risk of injury because of improper handling. This motor incorporates digital servo feedback. The product comprises a plain and smooth output shaft. This device needs no maintenance if used as intended because of its asynchronous nature. The unit has no second shaft end. Its feedback functions with a resolution of 1/2000000th revolution.

This motor is not completely protected against the penetration of liquids along the output shaft. The product portrays a friction-locked shaft-hub connection. This device has a high run quality between the output shaft and hub. The unit is not suited for use with helical toothed output pinions. Its allowable radial force at the output shaft is based on its average speed and bearing assembly. This motor features faster consumption of the lubricant on its bearings because of non-conforming loads. The product is balanced dynamically as per DIN ISO 2373 specifications. This device is to be mounted such that there is enough supply of air for cooling. The unit comes with the blower mounted on Side B. Its electrical connections include its power connection, blower connection, and feedback connection.

This motor is protected against overheating by the NTC thermistor in the drive. The product needs the reference point of its axis to be reset before beginning the operation after a power failure. This device has no labyrinth seal. The unit allows the output direction of the power connector to be changed in increments of 90 degrees . It must be taken care to avoid pinching and crushing during the handling and mounting stages. This asynchronous AC motor has a black housing coat.