2AD132C-B35OA1-BS03/S002

Product Description

Offered by Bosch Rexroth, the 2AD132C-B35OA1-BS03/S002 asynchronous AC motor works in unison with a compatible drive controller. This motor should not be operated without its blower. The product comes with two nameplates. This device portrays a surface temperature of more than 60 degrees C when it is being used. The unit features a derating when the pressure and torque drop before the rated speed is reached. It has an IP 54 protection class for its blower.

This motor must be mounted to the drive with a flange if foot mounting is chosen. The product can be installed vertically or horizontally. This device should not be lifted by using the blower. The unit installation should be done such that there is a clearance distance of at least 80 mm between the machine and the blower screen. Its bearings have a lifespan of 20,000 operating hours. This motor supports only very low axial shaft loads. The product should be operated only when a minimum volume of air is drawn through it. This device has a protective earth conductor connection as per EN 60204-1 specifications. The unit is delivered after testing for insulation resistance. Its original nameplate is attached to the housing permanently and should not be taken off.

This motor is identified by its type designation on the nameplate. The product features a maximum storage period of five years without restriction. This device must be free of load when it is transported. The unit must adhere to the safety regulations as well as guidelines for each application. It is meant to be handled only by qualified personnel. This asynchronous AC motor must be used only in machines intended for commercial use.