2AD132C-B35LB3-CS23-A2N1

Product Description

The 2AD132C-B35LB3-CS23-A2N1 from Rexroth Bosch Electric comes with a high-resolution feedback system that helps the closed-loop control system of this motor to accurately position the output shaft of this servo motor, ensuring it is placed accurately. This particular model of the servo motor comes with an electrically released holding brake capable of stopping the motor perfectly at the position of interest. This holding brake has a holding torque of 30 Nm and requires a nominal input voltage of 24 volts DC with a 10% tolerance level. The maximum braking energy of this brake is 30000 Ws and it has a clamping delay time of 65 ms, while it takes 120 ms delay for this brake to release the rotor from its clamp.

To mount this motor perfectly with a machine or rotating equipment, the 2AD132C-B35LB3-CS23-A2N1 can be mounted using both flange-type mounting as well as foot-type mounting. With the flange-type mounting, the motor can be attached perpendicularly to the machine with the shaft perfectly aligned with the rotating component to help reduce levels of vibration as well as prevent the shaft from breaking or bending under unbalanced radial stress on the shaft.

To operate this motor under normal conditions, the 2AD132C-B35LB3-CS23-A2N1 should always be operating in an environment with an ambient temperature between 0 degrees Celsius and 45 degrees Celsius, while during storing, this servo motor can be stored in a room with a temperature range between -20 degrees Celsius to 80 degrees Celsius. The motor is capable of withstanding a humidity range of 5 to 95% and comes with an IP 67 protection rating keeping it protected against dust grains of size 2 mm maximum as well as providing protection against liquids.