2AD132C-B35LB1-CS03-B2N1

Product Description

The 2AD132C-B35LB1-CS03-B2N1 is a 2AD series servo motor that comes with an Asynchronous motor design where the rotor and the stator of the servo motor are both operating at different speeds. This particular motor comes with the CS winding designation and has a base speed rating of 1500 rotations per minute while the motor offers a peak speed of up to 7500 rotations per minute also while offering a nominal torque rating of 96 Nm.

To operate this motor, the 2AD132C-B35LB1-CS03-B2N1 has a nominal voltage rating of 279 volts AC and since it has a 3-pole design, it requires a 3-phase input voltage while the current rating of this motor design is 39 amperes with the power rating of 15 kW. This motor can be mounted using both flange type mounting as well as foot type mounting and it depends on the application of this servo motor as well as the user preference. During high torque rotations, it is always recommended to install this servo motor using a flange to keep the shaft perfectly aligned with the center of the rotation to make sure the motor shaft does not break or bend.

This servo motor uses an axial blower with the B to A configuration where the air from the surroundings is pushed inside the motor enclosure to help cool the motor coil. This motor blower requires 400 to 480 volts AC to operate and draws around 0.71 amperes of current and has a protection rating of IP 24. The entire motor itself comes with an Ingress protection rating of IP 67 to keep it protected against dust and moisture. For feedback, this servo motor uses a high-resolution feedback system.