2AD132C-B35LB1-BS01/S015

Product Description

The 2AD132C-B35LB1-BS01/S015 asynchronous AC motor designed by Bosch Rexroth has a reduced lifetime of 50% for the grease on its bearings with vertical installation. This motor must be used with a drive controller that is programmed before startup so that it executes the application-specific functions. The product incorporates a cooling action by using the air currents guided through the shrouds over its surface. This device is always associated with feedback. The unit features the encoder connection on the same side as the power connection. It is not possible to change the position of the encoder connection.

This motor is subject to axial and radial forces on the bearings and output shaft. The product supports only very low axial loads. This device has a lifespan of 20,000 operating hours for its output shaft. The unit is not meant to be operated in explosion-endangered areas. It can be operated only if a specified minimum volume of air is drawn through the motor. This motor is CE Certified and UL Listed. The product should not be subject to repeated high-voltage inspection tests by the user. This device should be raised using only suitable lifting equipment on its eyebolts. The unit is meant to be installed only when it is not under power. Its electrical connections should be done only after its mechanical mounting.

This motor can be used only with spare parts and accessories approved by the manufacturer. The product is not compatible with third-party drive controllers. This device must be commissioned only after the electrical connection has been established properly. The unit should not be operated in a damaged or defective state. Its blower must be turned on and checked for the proper direction as the first step of the commissioning process. This asynchronous motor is protected against thermal overload by thermistors.