2AD132C-B35LB1-BS01/S001

Product Description

The 2AD132C-B35LB1-BS01/S001 asynchronous AC motor by Bosch Rexroth must be used only with spare parts and accessories offered by the manufacturer. This motor should be properly grounded before operation. The product comes with protective sleeves and covers on the output shaft and connectors. This device must be cooled down before it is touched after its operation. The unit has no holding brake. It is free of a stub shaft on Side B.

This motor generates vibrations if the motor elements on its output shaft are insufficiently balanced. The product has two thermistors in its windings but only one is connected at a time. This device must be put to use within the ideal operating conditions set by the manufacturer. The unit uses a flanged socket for the feedback connection. Its blower is connected with its protective circuit. This motor allows changing the cable output direction out of the terminal box in increments of 90 degrees . The product needs an air channel connection to be established for conducting cool air if it is operated in dirty environments. This device should be free of load when it is transported or stored. The unit must be handled and mounted by following the general safety and construction guidelines. Its mounting must be done only after keeping all the tools as well as testing and measuring equipment handy.

This motor must have its plug-in connections firmly secured in place when it is in use. The product should be checked regularly for the proper functioning of its blower. This device has an IP 65 protection class. The unit supports radial forces only in the vertical direction. Its utilization factors must be multiplied if the ambient operating temperature and the ambient installation altitude are exceeded. This asynchronous AC motor can be installed vertically with the output shaft facing upward or downward.