2AD132C-B05OR2-AD01/S001

Product Description

The 2AD132C-B05OR2-AD01/S001 from Rexroth is a 22 kW AC servo motor that can offer a nominal torque rating of 140 Nm. This servo motor requires 290 volts AC nominal tor to operate at 3-phase input configuration with a 50 to 60 Hz input frequency. The motor draws approximately 54 Amperes of current to operate and would require a heavy-duty power supply to function. This motor comes with a 3-pole or coil design that can be energized with varying input voltage frequencies to help regulate the speed of the motor.

This is a basic configuration motor that has a base speed rating of 1500 rotations per minute and can attain a maximum speed of 7500 rotations per minute allowing the motor to be used for drilling and high-speed robotics applications considering it offers a high torque gear ratio. To allow the motor to operate in a buttery smooth motion, the 2AD132C-B05OR2-AD01/S001 comes with standard-type bearings that require it to be lubricated after every 20000 cycles of use and should be replaced once the motor has been used for 30000 cycles to keep the motor performance at par and to prevent the parts wearing off over time.

To help keep the motor cool during high-speed operation, the 2AD132C-B05OR2-AD01/S001 comes with an Axial blower fan that requires 400 volts AC to operate. This Axial blower fan helps pull the ambient air from the front of the motor and pushes it backwards and out the back end of the servo motor cooling the internal parts of the motor in the process and helping the motor reduce heat dissipation rating of the motor and allowing it to operate efficiently.