2AD132C-B05OB2-BS03-D2N2

Product Description

The 2AD132C-B05OB2-BS03-D2N2 asynchronous AC motor manufactured by Bosch Rexroth incorporates the connection for its NTC thermistor in the power terminal. This motor has its power terminal and feedback connection on the same side. The product must be fitted with an air channel if it has to be operated in very dirty environments. This device should be ordered with the gearbox mounted if there is a need to use a coaxial planetary gearbox. The unit ensures operational safety if it is used as intended. It should be used only with the spare parts and accessories specified in its documentation. This motor operation is not allowed if the maximum temperature is very high.

The product must be stored and transported only horizontally. This device is likely to trigger dangerous drive controller movements if it has defective components. The unit should be isolated from the power supply and secured against restart before any work is done on it. It needs a cooling time of up to 140 minutes. This motor can be identified by its type designation given on the nameplate. The product has no support for foot mounting. This device has a feedback of high resolution. The unit has a two-phase or three-phase power supply connection for its blower. Its blower can be connected by opening and connecting a blower terminal box or plug.

This motor features protection against thermal overload. The product encompasses lubrication on its bearings that lasts throughout their lifetime with proper use. This device depicts vibrations if the bearings are worn out or defective. The unit must be connected only after its mechanical mounting has been done. Its thermistor issues a pre-warning when the surface temperature reaches 145 degrees C. This asynchronous AC motor should be mounted only after making sure that its mounting flange is free of burrs.