2AD132C-B05OB2-BS03-C2N1

Product Description

The 2AD132C-B05OB2-BS03-C2N1 asynchronous AC motor offered by Bosch Rexroth works in a drive system with the manufacturer's drive controller. This motor is not recommended for residential use. The product must not be dismantled in the pressurized state. This device can be used as a main-spindle drive. The unit has a frame size based on the height of its output shaft. It is designed for flange mounting as per IEC 34-7 specifications. This motor should never be operated without a blower.

The product deploys a star or wye winding connection. This device can be fitted with an integrated rotary encoder for its feedback. The unit encompasses a shaft seal around the output shaft. Its output shaft features a DS centering hole according to DIN 332 specifications at its end. This motor encounters a reduced speed when there is a drop in power and torque. The product can be safely operated at up to the rated speed. This device encounters axial and radial forces when it is in the operation phase. The unit has a lifespan of 20,000 operating hours as per ISO 281 specifications for its bearings. It comes with a nameplate attached to its housing.

This motor has a continuous standstill torque up to the derating speed with S1 operating mode. The product must be properly grounded before it is turned on. This device tends to portray vibrations if its mount has become loose. The unit has two NTC thermistors permanently installed in its winding although only one of them is connected at a time. Its encoder connection is established by using a plug connector or a flange socket. This asynchronous AC motor may require two power cables for its connection if a single cable cannot be used because of its large bending radius.