2AD132C-B05OB1-CS33-B2N1

Product Description

With the B2N1 configuration, the 2AD132C-B05OB1-CS33-B2N1 offers a balanced shaft design with no shaft seal. This is a 7500 rpm servo motor that has a flange size of 132 mm and has a frame length of C. The motor can be mounted only using a flange, which is perfect for high torque applications since the shaft of the motor will be perfectly perpendicular to the load on the shaft, reducing axial stress and preventing the shaft from bending or breaking during operation.

To operate the motor under nominal conditions, the 2AD132C-B05OB1-CS33-B2N1 Asynchronous motor has a nominal voltage rating of 279 volts AC and a nominal current rating of 39 Amperes. This motor has a 3 pole design and hence would require a 3-phase input configuration in order to function. The motor is low inertia, allowing it to attain a high speed in a very low time as the inertia is approximately 0.076 kgm², allowing this motor to accelerate and decelerate rapidly.

To cool the motor, the 2AD132C-B05OB1-CS33-B2N1 has an axial blower fan placed on the back end of the motor that pushes air from the back all the way to the front of the motor, helping it cool down the coil in the process, which due to winding resistance may emit some heat during high-speed operation. The motor winding resistance is 0.36 ohms, while the inductance of the winding is 2.5 mH, which helps with reducing the overall electrical spikes in the motor, keeping the operation smooth. The motor features high-resolution motor feedback, while the holding brake configuration is an electrically released 100 Nm holding brake that requires 24 volts DC to operate while drawing up to 1.8 Amperes of current.