Product Description
Designed to run on PWM and vector control methods, the 2AD132C-B05OB1-CS33-A2N1 from Rexroth Indramat is a 2AD series servo motor that offers a nominal base speed of 1500 rpm. To rotate heavy loads and components, the 2AD132C-B05OB1-CS33-A2N1 offers a torque of up to 96 Nm. Since this motor generates such high rotational forces, it requires around 39 Amperes of current while operating at 279 volts AC. One of the standout features of the 2AD series of motors is the integration of an axial blower fan. This fan requires 400 to 460 Volts AC to function but can help the motor cool down its poles at a much quicker pace with a flow rate of 1000 m³ per hour. This helps the coil reach 63.5% of the motor coil within 100 minutes, which is also the thermal time constant of the motor.
To keep the motor protected from harmful environments, the 2AD132C-B05OB1-CS33-A2N1 servo motor offers IP 67 protection against dust and low-level water splashes. This motor configuration comes with a smooth shaft but does not offer a shaft seal. This motor is designed particularly to be installed in high-temperature environments such as warehouses, production plants, refineries, etc., and can withstand ambient temperatures of up to 45 degrees Celsius along with high humidity of up to 95%. In order to store this motor in a well-contained environment to make sure the motor does not get damaged due to heat or other environmental factors over time, the 2AD132C-B05OB1-CS33-A2N1 can be stored in a room with a temperature maintained between -10 to 80 degrees Celsius.
To prevent the shaft from unintentionally or intentionally moving outside of the control signals provided by the motor controller, the 2AD132C-B05OB1-CS33-A2N1 comes with a 100 Nm heavy-duty holding brake. This brake requires 24 volts DC to operate while requiring an amperage of 1.8 Amperes. In such a case, this motor will require a heavy-duty power supply that will offer both AC and DC output voltages along with high current capacity.
Wake Industrial Warranty
