2AD132C-B05OB1-CS23-B2N1

Product Description

Designed to provide a torque of up to 96 Nm, the 2AD132C-B05OB1-CS23-B2N1 from Rexroth is an induction motor that runs on the Asynchronous motor design. This motor comes with 3 poles meaning it has 3 electromagnets that allow the motor coil to rotate and with the help of the input voltage of 279 VAC nominal, the motor input frequency can be varied in order to move the shaft on a specific speed but the frequency of the voltage should remain between 50 Hz to 60 Hz following the international standards.

This particular motor configuration has attained a maximum speed of up to 9000 rotations per minute and has a base speed rating of 7500 rotations per minute making it a great choice for high-speed drilling and CNC milling applications. The 2AD132C-B05OB1-CS23-B2N1 motor can also be used for robotics applications as it comes with a high-resolution motor feedback system in order to control the output variables such as motor speed and shaft positioning using a closed loop control feedback system where a setpoint is used in order to keep the motor system stable by adjusting the PID values of the motor.

To lock the shaft in a particular position, the 2AD132C-B05OB1-CS23-B2N1 asynchronous motor comes with an electrically released holding brake that has a holding torque of 30 Nm. This holding brake requires 24 volts DC to operate with a 10% voltage tolerance and draws around 1.3 Amperes of current when this brake is used. The holding brake is also perfect for applications that require heavy load rotations to prevent the shaft from slipping when the shaft position needs to be fixed in a position. During power loss scenarios, a holding brake is very beneficial as it can lock the shaft on the last moved position.