Product Description
The 2AD132C-B05OB1-BS03-A2V1 asynchronous housing motor produced by Bosch Rexroth can be connected with an air channel using an additional blower base. This motor has no shaft extension on Side B. The product is connected to the blower using the blower plug. This device should be dismantled only after bringing the drive to a standstill position using the machine-side commands. The unit is a part of a drive system with a control and a drive controller. It may cause material damage due to errors in its activation. This motor must be commissioned before it is put to use. The product must be deactivated if maintenance measures have to be undertaken or there is a malfunction. This device tends to have limited availability if it is operated under unfavorable conditions. The unit should be checked for intact electrical and mechanical connections after every 1000 hours of operation. Its blower is meant to be disconnected before any work is done on it.
In the case of malfunction, it is good practice to investigate the blower section. The product is likely to have an unusually high housing temperature if its bearings are worn out or the blower system fails. This device tends to vibrate if the machine elements on its output shaft are insufficiently balanced. The unit should be stored and transported horizontally. It must be installed when it is not under power.This motor must be connected with the manufacturer's readymade cables. The product is meant to be commissioned only after establishing a proper electrical connection. This device has an IP 65 protection class. The unit is to be mounted such that there is a sufficient supply of air for cooling. Its feedback functions with a resolution of 1/2000000th revolution. This asynchronous AC motor incorporates its power connection with the NTC thermistor connection, blower connection, and feedback connection in its electrical connection.
Wake Industrial Warranty
