Product Description
The 2AD132C-B05OB1-BS03-A2N1 asynchronous AC motor delivered by Bosch Rexroth cannot be operated without a drive controller. This motor should be used only with the accessories specified in its documentation. The product must not be used if the operating conditions do not meet the specified ambient conditions. This device has a surface temperature of over 60 degrees C when it is in use. The unit is intended to be used only with the spare parts and accessories supplied by the manufacturer. Its ground wire must be permanently connected as per the connection diagram. This motor may cause the drive controller to move dangerously because of its faulty control.The product should never be picked up by holding the connected blower. This device is supplied for flange mounting according to IEC 34-7 specifications. The unit must never be operated without a blower. It is capable of performing the application-specific functions only if the connected drive controller has been programmed before its startup.
This motor contains two temperature sensors in its windings to protect it against thermal overload. The product portrays reduced output if it is operated outside the ambient conditions. This device has an IP 40 protection class for its output shaft. The unit comes with grease lubrication in its bearings that last throughout their lifetime with normal operation. Its cooling takes place by guided air currents.This motor is delivered after a high-voltage inspection test. The product should not be subject to mechanical stress during transportation and storage. This device comes with protective caps and covers on the output shaft and connectors. The unit must be mounted only after checking its components for visible damage. It cannot be operated in areas where there is a risk of explosion. This asynchronous AC motor uses a power connector with a thread for its connection.
Wake Industrial Warranty
