2AD132C-B05OA1-CS03-C2N1

Product Description

The 2AD132C-B05OA1-CS03-C2N1 Bosch Rexroth asynchronous AC motor supports only low axial forces. This motor encompasses its blower on Side B. The product includes its power connection, feedback connection, and blower connection in its electrical connection. This device does not support changing the direction of the power connection. The unit is protected against overheating by the NTC thermistor in its winding. Its feedback has an absolute accuracy of +/-0.02 degrees . This motor uses its feedback for relative indirect position detection.The product must be equipped with a blower support base to connect an air channel. This device portrays an average air volume of 1000 m^3/h for its blower. The unit takes up to 140 minutes to cool down. Its blower must be checked for proper functioning on a yearly basis. This motor has live connecting points during the operation period. The product should be connected only after it has been mounted mechanically.

This device must be lifted using suitable equipment. The unit should be properly grounded before its operation. Its blower tends to rip off if it is used to lift the motor.This motor must be fitted with its blower base before it is mounted. The product may cause the drive controller to move dangerously because of a faulty setting. This device has a high electrical voltage when it is in operation. The unit must be operated only by qualified personnel. It can cause unfavorable consequences if it is not used properly. This asynchronous AC motor is likely to get damaged because of improper storage.