2AD132C-B05OA1-BS01-B2N1

Product Description

The 2AD132C-B05OA1-BS01-B2N1 asynchronous AC motor produced by Bosch Rexroth functions like an induction motor. This motor must be installed such that there is a sufficient distance between the machine in which it is installed and the blower screen. The product encompasses an output shaft with a keyway. This device is balanced with a half key. The unit is meant to be installed only in commercial machines. It can be fitted with only replacement parts specified by the manufacturer. This motor is equipped with plastic protective sleeves that must be removed only just before its assembly.

The product should be free of load when it is transported and/or stored. The device must also not be tipped or dropped during this phase. The unit encompasses a second type plate that is fixed over the original type plate but can be removed. Its type plate comprises the technical details required at the time of service. This motor features an R vibration severity grade. The product does not have a Side B shaft end. This device encompasses its power connection and encoder connection on the same side. The unit does not support changing the position of the encoder connection. Its output shaft must not be subject to strong reversing operation as this can result in deformations in the keyway area.

This motor must be used with a graduated key if the hub is short. The product is prone to radial and axial forces on the output shaft and bearings when it is in use. This device encompasses standard deep-groove ball bearings with a low-noise running action, high lifetime, and suitability for high speeds. The unit supports only low axial shaft loads. Its bearings tend to depict premature failure because of mechanical damage or increased wear. This asynchronous AC motor is balanced dynamically as per DIN ISO 2373 specifications.