Product Description

The Bosch Rexroth 2AD132B-B550B1-BS03-B2N1 asynchronous servomotor has a standard ball bearing assembly. This motor is compatible with the INDRADRIVE, DIAX or ECODRIVE series of drive controllers from the same manufacturer. The product has an average sound pressure level of 75 dBA at 1 meter. This device is tested to ensure operational reliability and safety. The unit is intended to be installed as mentioned in its documentation. It might be needed to use additional sensors and acutators to control and monitor the motor. This motor is largely used in machine tools as well as printing and paper processing, foodstuff and packaging machines. The product cannot be used when there is extreme temperature fluctuation. The device has live connecting points when it is in use. This unit must have a proper earthing connection before it is operated. It may cause the connected drive controller to move dangerously if it has defective components. The servomotor housing offers protection against contact with moving parts or parts to which voltage is applied. This product should be equipped with a labyrinth for safeguarding it against the penetration of liquids through the shaft. The device must also be fitted with an air channel for conducting clean air if it has to be operated in dirty environments. This unit has a nominal current rating of 45 A and a nominal voltage rating of 168 V. It deploys a feedback of high resolution. The motor depicts derated output when the ambient temperature or installation elevation exceeds the permissible limits. This product encompasses protection against a water jet sprayed from a nozzle onto its housing in all directions.