2AD132B-B35OR2-BS03-B2V2

Product Description

The 2AD132B-B35OR2-BS03-B2V2 asynchronous AC motor produced by Bosch Rexroth is compatible with selected drive controllers from the manufacturer. This motor must not be structurally modified in any way. The product can perform the application-specific functions only if the drive controller is programmed before its startup. This device should adhere to the ambient conditions specified in its documentation. The unit must never be operated without its blower. Its electrical connection points should not be touched when the power is switched on. This motor must be handled using appropriate mounting and transport equipment.The product is manufactured using environment-friendly materials that do not harm the environment. This device is an air-cooled induction motor. The unit encompasses a squirrel-cage rotor.

It is supplied with a matching key. This motor supports large radial forces because of the type of bearings incorporated. The product has a nameplate permanently attached to its housing. This device portrays reduced output when the recommended operating conditions are exceeded. The motor can be safely operated at up to the maximum speed set by the manufacturer. This unit must be supplied with clean air for cooling externally through a hose when it is used in a polluted environment. It is meant to be connected with only the manufacturer's cables. This product must be protected from dampness and corrosion during transport and storage. The device is prone to damage with several high-voltage inspections. The unit-related blower is connected with either two or three phases to the power supply through a motor protection switch and blower cables to the power supply. It has no shaft seal. This asynchronous AC motor supports only low axial shaft loads.