2AD132B-B35OR1-DS03-B2N2

Product Description

The 2AD132B-B35OR1-DS03-B2N2 asynchronous AC motor from Bosch Rexroth is always used with the manufacturer's drive controller. This motor is associated with the 2AD range of such motors. The product and the drive controller in unison offer a drive solution with a high power density. This device can be installed in any orientation. The unit must be used only as intended. It is intended to be operated only in industrial machinery. This motor must neither be opened nor disconnected in the pressurized state.The product has a black prime coat on its housing. This device is not equipped with any holding brake. The unit portrays a very hot surface immediately and soon after the operation phase. Its faulty control can result in dangerous movements of the connected drive controller. This motor should be operated only with a blower. The product incorporates a star or wye connection. This product supports an integrated rotary encoder for feedback. The device comes equipped with two nameplates.

The motor depicts a derated speed when the torque and power drop before reaching its rated speed. This unit encounters axial and radial forces on the shaft and bearings during the operation phase. It is possible to change the output direction of the power connection by 90 degrees . The product has an overall length of 273 mm. This device comes with a matching key. The unit must never be picked up by holding onto the output shaft. It is meant to be properly grounded before it is turned on. This asynchronous AC motor is balanced dynamically as per DIN ISO 2373 requirements.