2AD132B-B35OB2-AD01

Product Description

2AD132B-B35OB2-AD01 is a Bosch Rexroth motor from the 2AD series. It is suited to industrial applications. The motor has an axial cooling fan for surface cooling. This cooling method provides higher rates of heat dissipation compared to convection cooling. As a result, motors with surface cooling provide higher output torque and power. The axial fan requires three-phase power at 400/460 Volts AC. It provides 100 cubic meters of average airflow per hour. Power consumption of the fan varies between 145 and 170 VA. 2AD motors require 0 to 45 degrees Celsius for providing rated output. Power for the motor is supplied by a motor controller. The power cable connecting the motor and the controller connects to a power terminal on top of the motor. The 2AD132B-B35OB2-AD01 does not feature a holding brake.

However, operators can order holding brakes for 2AD motors. The 2AD132B-B35OB2-AD01 is servo motor and provides position and speed feedback. The controller uses motor feedback to minimize or eliminate difference between the setpoint (desired value) and the current value. Output shaft on the motor complies with IP40 requirements. The power connection on the motor complies with IP65 requirements. The feedback connection on the motor complies with IP65 requirements. The axial motor cooling fan is IP54 rated. Bosch has provided a flange on the motor housing for mounting. In addition, the motor supports foot mounting. Operators can order 2AD motors with a plain shaft for friction-locked shaft-hub connections and shafts with key. The shaft can be ordered with a shaft seal to improve ingress protection. Bearings used for 2AD motors are lifetime lubricated and don't require replacement or maintenance.