2AD132B-B35OB1-BS03-A2V1

Product Description

The 2AD132B-B35OB1-BS03-A2V1 AC asynchronous motor supplied by Bosch Rexroth must be mounted after keeping the required tools and equipment handy. This motor deploys a blower that uses the blowing principle to direct the air stream over the motor surface through the air baffles. The product features the power connection, feedback connection, and blower connection in its electrical connection. This device features high-resolution feedback for relative indirect position detection of the rotor. The unit needs an air channel connection for conducting clean air when it is operated in dirty environments.This motor should not be operated at a temperature higher than 55 degrees C. It is equipped with heavy-duty bearings. The product encompasses a protective earth conductor connection as per EN 60204-1 specifications.

This device must be warmed up at 1000 rpm speed for an hour before normal use after a storage period of one year. The unit is meant to be mounted by taking care not to jam or pinch its centering diameter. Its protective covers from the output shaft and connectors must be removed only just before the mounting process is started.This motor is intended to be connected using only the cables provided by the manufacturer. The product comes with two temperature sensors in its windings. This device features its output shaft on side A. The unit is largely operated in printing machines. Its surface tends to become very hot during the operation phase. The asynchronous motor relies on its feedback to measure the position of the rotor and signal it to the drive.