2AD132B-B35LL1-BS03-D2N1

Product Description

The 2AD132B-B35LL1-BS03-D2N1 asynchronous motor introduced by Bosch Rexroth is equipped with a keyway shaft. This motor is balanced with an entire key. The product encounters a premature failure of its bearings due to reduced grease lifetime, mechanical damage, or increased wear. This device always operates with a blower and a drive controller. The unit is CE Certified and UL Listed. It is subjected to a high-voltage test and insulation resistance test before delivery. This motor supports a transportation temperature range of -20 degrees C to 80 degrees C. The product has a distinct type plate that has the required details needed at the time of service. This device must be handled by using suitable lifting equipment on the eyebolts of its housing. The unit supports keyed transmission of torques with low shaft-hub connection requirements and constant direction. Its machine element that is to be driven must be balanced without a key. The motor has a shaft seal made of rubber on the output shaft as per DIN 3760, Type A specifications. This product must not be operated at higher than 55 degrees C.The device is delivered without any kind of holding brake. This unit has no shaft extension on side B. Its shaft seal supports the attachment of transmission elements with circulating oil lubricating systems. The asynchronous motor must be used only in a machine in which the loading limits of the bearing and shaft are not exceeded. This product is equipped with standard bearings that make it suitable for operation at high speeds. The device must not undergo repeated high-voltage inspection tests as this can cause damage.