2AD132B-B35LL1-BS03

Product Description

The 2AD132B-B35LL1-BS03 asynchronous motor introduced by Bosch Rexroth has an overall length of 273 mm. This motor uses a blower to perform the cooling action. The product is dynamically balanced as per DIN ISO 2373 specifications. This device may encounter repercussions based on the vibration behavior of the driven or attached machine elements. The unit is not designed for operation in potentially explosive areas without taking appropriate measures. Its operation is possible only if a specified minimum quantity of air is drawn through the blower. This motor has reduced output when its ambient operating conditions are exceeded.The product supports only very low axial loads. This device offers no support for a second shaft extension. The unit can function like a main spindle motor. Its feedback regulates the rotor position and speed. This motor can be installed with the shaft upwards or downwards. The product is largely deployed in reshaping machines.

This device offers protection against contact with its moving parts by its covers and housing that adhere to DIN 40 050 specifications. The unit must not be installed at an elevation higher than 5000 m above sea level.This asynchronous motor is protected against water sprayed onto its housing from a nozzle. Its permissible radial force on the shaft depends on the average speed and bearing assembly. The product tends to have a long working life if it incorporates standard bearings. This device supports a blowing action for the air stream used for the cooling. The unit has a NTC thermistor connection in its power connection. Its blower operates independently of the connected drive controller.