2AD132B-B35LF6-BS06-A2N1

Product Description

The 2AD132B-B35LF6-BS06-A2N1 asynchronous motor supplied by Bosch Rexroth is compatible with the manufacturer's IndraDrive range of drive controllers. This motor may trigger property damage with inappropriate use. The product may need additional sensors and actuators to control and monitor it. This device is meant to be deployed only in industrial machinery. The unit must be handled only by trained and qualified personnel. It must always be operated only after establishing a grounding connection. This motor generates audible or tactile vibrations if its mount has become loose.The product is meant to be used in standstill mode in normal operation when performing a drive-internal check. This device experiences poor performance of its blower because of dirt accumulation.

The unit has an IP 54 protection rating for its blower. It can be mounted horizontally or vertically per DIN IEC 34-7 specifications. This motor has a high run quality between its shaft and hub. The product must be mounted to the drive with a flange whenever it is possible to do so when a foot assembly is opted.This device encounters axial and radial forces when it is put to use. The unit has reduced grease lifetime with vertical installation. It must at no time be operated without a blower. This asynchronous motor is cooled by air currents guided through shrouds over its surface. The product does not come with any holding brake. This device uses a connector on its blower for the electrical connection. The unit renders a drive solution with high power density and open functions along with the drive controller.