2AD132B-B35LB3-BS00-A3N1

Product Description

The 2AD132B-B35LB3-BS00-A3N1 features a smooth, plain shaft capable of delivering power at higher speeds. Generally, motors equipped with a smooth shaft are suitable for high-speed applications and provide hassle-free operation since smooth shafts require less maintenance than keyed shafts. During operation, the motor delivers a rated RPM of 1500 rpm. With the 2AD132B-B35LB3-BS00-A3N1's standard bearing, however, the operating speed may be adjusted up to a maximum value of 7500 rpm. The 2AD132B-B35LB3-BS00-A3N1 allows foot and flange methods of mounting and has a vibration severity grade of 1. With this vibration category, the 2AD132B-B35LB3-BS00-A3N1's root-mean square vibrational value in mm/s is 0.71, assuming rated speed.

The 2AD132B-B35LB3-BS00-A3N1 employs a set of radial blower fans that facilitate surface cooling of the motor. The radial blower fans guide air currents to flow from the motor's rear side to the drive side. The 2AD132B-B35LB3-BS00-A3N1 has a terminal box connection on side B and a power terminal on its left side. Based on its nameplate, the 2AD132B-B35LB3-BS00-A3N1 can deliver the following rated values: 10 kW, 64 Nm, and 45 A. The machine also features an insulation class of F and a thermal time constant of 45 minutes. The minimum power wire cross-section for this motor is 10 square millimeters.

The 2AD132B-B35LB3-BS00-A3N1 is a relatively heavy motor, weighing about 200 pounds. Although this machine supports both flange and foot installation types, its weight poses a challenge during the installation phase. To safely fix the motor, especially at an elevated place, make sure to use the proper lifting equipment and follow the installation guidelines applicable for Rexroth's 2AD motors. To get an exclusive offer and warranty for the 2AD132B-B35LB3-BS00-A3N1, request a quotation from Wake Industrial's staff.