2AD132B-B35LA1-BS03-A2N1

Product Description

The 2AD132B-B35LA1-BS03-A2N1 AC motor variant by Indramat Rexroth. This variant has a weight of 90 kg without the mass of feedback and holding brake. The nominal current of the machine is 30 A, and the nominal voltage of this variant to run at a base speed of 1500 rpm is 258 volts. The thermal time constant is 45 minutes under zero conditions. The rotor moment of inertia of the machine is 0.054 kgm2.

It has integrated high-resolution motor feedback and comes with universal bearings that can make this machine run up to 7500 rpm. The output shaft is smooth and doesn't? come with sealing rings. However, customized orders can be placed with additional shaft seals. The 2AD132B-B35LA1-BS03-A2N1 is not equipped with holding brakes. The cooling mode is through an axial blower and the air flow direction is from side B to side A. The power consumption is 170 VA against a phase power supply of 400 V whereas it is 145 VA against three phase power supply of 460 V.

Indramat Rexroth advised the users to maintain a pleasant environment for motors in case of storage and avoid removing protective plastic sleeves. These protective sleeves are pre-installed by the manufacturer on the connector housing and output shaft to protect the machine against moisture and mechanical damage. The construction type of this variant of the motor is flange and foot mounting. The 2AD132B-B35LA1-BS03-A2N1 has well-known class F insulation that protects the motor and increases the durability of the motor. The minimum power cross-section area is 10 mm2 as per EN 60204. The ambient temperature of this variant under operating conditions is up to 45 degrees centigrade and advised to operate above 0 degrees centigrade.