2AD132B-B05OA1-BS01/S001

Product Description

The 2AD132B-B05OA1-BS01/S001 by Rexroth Bosch has bearings and a driven shaft for efficient rotation and production of torque. Due to their reduced EMF resistance, the thick bars are effective at low slip and provide good torque. Though torque is maintained, efficiency is decreased as the slip grows because of the skin effect, which also starts to raise resistance and decrease effective depth. When the rotor bars are at a standstill, a high-speed rotational magnetic field passes over them, causing line-frequency current to flow through them. The slip frequency drops and the generated current flows deeper into the winding as the motor runs.

The 2AD132B-B05OA1-BS01/S001 of the 2AD series has a 132B dimension and a blower unit. The start or stop feature in motor controllers allows the motor to be started or stopped gradually rather than abruptly with full voltage. Its seamless acceleration and deceleration process reduces mechanical stress on the motor and any related equipment during starting and shutdown. This reduces mechanical damage on the motor's bearings and windings and prevents sudden torque spikes. As the axial fan impeller revolves, air enters from the inlet and is pushed by the impeller blades, which increases the air's energy. After entering the guide vanes, the airflow is guided into the diffuser by being deflected in an axial direction.

A ball bearing with a significant radial margin and angular contact bearing support a high axial load. A ball bearing's limit speed is extremely high and its coefficient of friction is very minimal. This squirrel cage motor is a good fit for applications requiring medium-to-low initial torque requirements.