2AD104D-B35OA1-ES06-D2N1

Product Description

The 2AD104D-B35OA1-ES06-D2N1 is a 2AD series AC motor mainly used as a tool and printing machine. The construction style is flange and foot type, and it comes without holding brakes. It has the cooling method through an axial blower to evacuate the excessive heat inside the motor due to winding and continuous operation. The power consumption of the axial blower is 60 VA, and the average air volume is 230 m3/hr. It has a rated speed of 1500 revolutions per minute, and the peak speed with standard-type bearings is 9000 revolutions per minute.

The motor 2AD104D-B35OA1-ES06-D2N1 feedback is a digital servo, and the output shaft is balanced with entire key. It comes with a shaft seal. Balanced with a full key indicates that the rotor is balanced with the key used in the shaft-hub assembly. The rotor is balanced with the full key. A balanced, interconnecting part (toothed wheel, etc.) must be used. The keyway in the hub is not dependent upon the length of the key. The motor is equipped with a sealing ring, per DIN 3760, type A. The shaft seal is a rubbing seal.

The 2AD104D-B35OA1-ES06-D2N1 noise is tested at a distance of 1 meter, and pulse width modulation of 4 kHz, the average sound pressure level is 70 dB. It has a thermal time constant of 45 minutes. It's the time it takes for a system to reach approximately 63.2% of its final temperature difference when subjected to a sudden change in temperature. The power terminal output direction is at side A.  The vibration severity grade of the machine is regular. The recommended ambient temperature range is from 0° to +45°C whereas the installation altitude is up to 1,000 meters above sea level.