2AD104D-B05ODE-FS29-D2N1

Product Description

The 2AD104D-B05ODE-FS29-D2N1 is an asynchronous induction motors, commonly known as induction motors. These motors feature a high-power density & a broad speed range making it ideal for conditions where a high power to weight ratio is required. These motors are designed to operate with high efficiency to reduce running costs by using advanced construction methods & optimized algorithms. These are manufactured by the reputed Bosch group which have a long legacy of providing industrial solutions.

These motors are tested in ambient temperature of 0-45 degree Celsius & 1000 meters above sea level. This specific model is balanced with a with entire key and with a shaft sealing ring. It has an IP 65 rating for output shaft. It as a flange mounting to connect the motor to the required machine. With a connector to side A with terminal box on blower. Cooling is made possible by an axial blower unit. Motor feedback is made possible by high resolution motor feedback. The acceptable axial load is very low therefore it is not suited for helical toothed output pinions.

The 2AD motor series is available with integral holding brakes which can be ordered with electrically-engaged clamp or electrically-engaged release but this model does not include one. The motor NTC thermistor is built into the motor windings. The NTC thermistor monitor in the drive protects the motor against overheating. Nominal torque is 64 Nm & nominal power is 10 Kw. This model has a base motor speed of 1500 min-1 & the peak speed is 9000 min-1. Nominal current is 22.3 A & nominal voltage is 390 V. Rotor inertia is 0.028 kgm2. The thermal time constant is 45 min. It features a minimum cross section of 4 mm2. The warranty offered is 1 year.