2AD104D-B05OB7-FS06-C2N1

Product Description

Rexroth’s 2AD motors provide flexible cooling options along with powerful loading capabilities. Commonly, Rexroth Bosch's 2AD motors come with axial cooling fans that facilitate surface cooling during operation. These mounted axial cooling fans extend the length of the motor and contribute to its heavier construction. Aside from axial fans, Rexroth Bosch’s 2AD motors may come with radial fans instead. Radial fans differ from axially mounted fans based on their placement along the motor. Whereas axially mounted fans are usually installed along the shaft’s axis, radially mounted fans are installed on a side perpendicular to the drive side. 

An example of a 2AD motor that incorporates a set of radially mounted fans is the 2AD104D-B05OB7-FS06-C2N1. Based on the type codes in Rexroth’s 2AD manual, this motor model has a cooling category of 7. Motors with this cooling mode have a radial blower below that directs air current to flow from side B to A. The radially mounted blower for this motor model has a 230 V supply requirement and a protection category of IP 24. The 2AD104D-B05OB7-FS06-C2N1's power connector is on side B. Another strong feature of this motor model is that it accommodates all variations of flange mounting to suit different applications. 

With a winding designation of FS, the 2AD104D-B05OB7-FS06-C2N1's base speed at no load is 1800 rpm. Because of its standard bearing, the motor may safely operate at a maximum limit of 9000 rpm. Whenever running at the base speed, the 2AD104D-B05OB7-FS06-C2N1 has a torque of 64 Nm. Because its output shaft has a sealing ring, the motor’s drive side's protection category is IP 65. Furthermore, the 2AD104D-B05OB7-FS06-C2N1 offers digital servo feedback that excels for applications requiring high accuracy.