2AD104D-B05OB2-FS06-A2N1

Product Description

Rexroth Bosch Group manufactures the 2AD104D-B05OB2-FS06-A2N1 motor. It has a rated torque of 64 Nm and a standstill continuous torque value is also the same.

The rated current value of this motor is 8.7 A and similar to the torque, its standstill continuous current also remains the same. The rated power consumption of 2AD104D is 3.5 kW and the rated speed of this motor is 480 rotations per minute. The derating speed is the same as the rated speed but the maximum speed can be reached up to 9,000 rotations per minute. The minimum cross-section of the power connection is 4.0 mm2 and the moment of inertia of the rotor is 0.027 kgm2. According to DIN VDE 0530-1, it belongs to the F insulation class which means it can operate at higher temperatures as compared to the motors with lower levels of insulation.

This motor can be connected to any surface or device through flange mounting and the power terminal position is at the top with the power terminal connector on side B. The cooling system of the 2AD104D motor is equipped with an axial blower that operates at a nominal voltage of 230 or 115 V. This motor has no holding brakes but digital servo feedback. The output is smooth with no shaft seal and also lacks a side B shaft end. The bearing is of N standard and the vibration severity grade is R. 2AD104D motor has ratings of IP65 for motor protection and IP24 for blower protection that represents that the blower and motor are resistant to dust particles and low-pressure water sprays.